STRAINER – KFD-YSF
Strainers in various configurations help remove debris from your pipelines by directing the flow through a screen to remove contaminants; ideal for liquids, gases and even steam piping systems.
A Y type strainer is designed for mechanically removing unwanted solids using a straining element.
As its name implies, a Y type strainer has a compact, Y shaped design.
The Y shape has better flow characteristics then a T shaped strainer, because the fluid flows through the filter with less change of direction.
The filter can be accessed easily for cleaning or replacement by loosening and removing a plug at the end of the filter leg.
Y type strainers can be installed in a vertical or horizontal position.
They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment.
KFD-YSF strainer - DIN PN
-
Cast Steel Y Strainer
DIN PN 16 - F1, 1½" - 24" (DN40 ~ DN600)
DIN PN 25 - F1, 1½" - 24" (DN40 ~ DN600)
DIN PN 40 - F1, 1½" - 24" (DN40 ~ DN600)
Features
- Simple and economical solution for water, oil and gas
- Effectively fi lters foreign matters in the pipeline
- May be installed in vertical or horizontal pipelines with blow-off connection at the lower end of the screen
- Various mesh size upon request
- EN10204-3.1 Material certifi cate available
Standards
- Basic design to EN12516-1
- Face-to-face acc. to EN 558 Series 1(DIN 3202-F1)
- Flange dimension acc. to EN 1092-1
- Inspection & test acc. to EN 12266-1 where applicable
Limitations
- For steam service, please inquire separately
KFD-YSF strainer - ISO CLASS
-
Cast Steel Y Strainer
ISO CLASS 150, 2" - 16" (DN50 ~ DN400)
ISO CLASS 300, 2" - 16" (DN50 ~ DN400)
ISO CLASS 600, 2" - 16" (DN50 ~ DN400)
Features
- Simple and economical solution for water, oil and gas
- Effectively fi lters foreign matters in the pipeline
- May be installed in vertical or horizontal pipelines with blow-off connection at the lower end of the screen
- Various mesh size upon request
- EN10204-3.1 Material certificate available
Standards
- Basic design to ASME B16.34
- Flange dimension acc. to ASME B16.10
- Flange dimension acc. to ASME B16.5
- Inspection & test acc. to API 598 where applicable
Limitations
- For steam service, please inquire separately
