INTEC K220-S-DE - CAVITY RELIEF
Cavity relief with both side spring loaded seat rings of a floating ball valve design.
By means of double loaded seat rings the input-side seat will be pushed back at 2 bar higher ressure in the cavity, with the result, that the pressure in the cavity escapes to the inflow side. The automatic pressure relief device provides a safe relief of the cavity by not allowable high pressure increases. The ball valve can be used in both directions, the cavity relief works with all expanding media.
Product Advantages
- Cavity relief with both sides spring loaded seat rings (from 2 bar higher pressure in the cavity)
- Bi-directional service
- Suitable for expanding media
- Equipped with all advantages of type INTEC K200
Accessories
- Heating jacket
- Hand lever extension
- Stem extension
- Grid unit
- Hand lever with bayonet locking
- Spring close unit - automatical return handle ("dead man handle")
- Gear (hand operated)
Special Designs
- Special designs like Duplex, Super Duplex, Hastelloy B2/C4/C276, Titanium, Zirconium, Monell, Nickel etc.
- Further pressure ratings on request
Certificates and Approvals
- Certified acc. to German clean air act VDI 2440 and DIN EN ISO 15848-1 (in process)
- Fire-Safe acc. to API 607 and DIN EN ISO 10497
- Classification acc. to SIL 2
- ATEX 2014/34/EU
- Type Test Certificate TTC (optional)
- Certified acc. to API 6D (optional)
General Information
- The specified pressure and temperature values showing the maximum range for orientation only. For the necessary design please note the pT diagram in the respective data sheet. Main criterion of the material code is the basic material of body and cap. The performance and service life of KLINGER valves depend to a large extent on proper storage and fitting - factors beyond the manufacture’s control. We can, however, vouch for the excellent quality of our products. With this in mind, please also take note of our operating instructions.
